Thursday 28 March 2013

MIG Welder Repair



A "tale from the shed" rather than the "road" since I refuse to ride anymore until the cold weather stops.

A MIG welder is a useful tool for any biker. It can weld thin steel so works well on exhausts etc. I bought mine a few years ago but it isn't very good. Its a SIP HandyMIG. The main problem is the wire feed. The motor isn't very powerful and the drive often slips. This causes the feed to be uneven and the welds to be poor. An improvement I did, suggested on the internet, consists of a metal strip to hold the drive wheels in alignment. The plastic holder deforms and the drive is reduced. This helped some but the problem seems that the resistance in the plastic liner is too great. I measured this at 4 lb. So I replaced this with a steel liner.

MIG welder

 I'm using flux cored "gasless" wire. This is convenient and economical. The gas bottles the welder uses last only minutes.

 I've added a steel strap between the drive roller mounts to improve the feed

Measuring the force needed to feed the wire

 Plastic liner (top) & metal liner (plastic outer in place & removed)


The feed was smoother with the new liner and reasonable welds are possible.



10 comments:

  1. We've worn out a few small portable Hobart mini-mig units at work. Recently we picked up a Miller 'suitcase' mig unit. It's ok for small jobs, but has a very tiny bottle and spool of wire.
    At home I still have an old Lincoln AC arc welder and my oxy/acetylene rig. Would like to purchase a Tig welder before I retire. No worries about wire feed mechanisms.
    When the mini migs were running their best I was getting some pretty decent beads with them. We run a CO2/Argon mix that was pretty good.

    ReplyDelete
  2. Hey It is wonderful information about MIG Welding what I am searching for found on your blog.Diffusion engineers offers variety of quality MIG welding machines that are affordable, powerful, and universal in terms of power requirements.
    MIG Welding,Welding Machine, TIG Welding, Welding Electrodes.

    Thanks for such great piece of content.

    ReplyDelete
  3. Small bits of content which are explained in details, helps me understand the topic, thank you!

    Mig welding

    ReplyDelete
  4. What a great DIY. I'd probably bought a new equipment if I were the one experiencing this but you did repair your welder successfully. Hope it can weld more in the future. Keep it up!

    ReplyDelete
  5. They are widely used on construction sites, farms, and various industries. They function similarly to regular generators. You just have to fill the tank and start them up. Weblink

    ReplyDelete
  6. It was really frustating event to me, when my first welder become collapsed, I could not understand how to fix it. The days passed, I become a professional welder and learnt a lot how to fix a welder now. Recently I have started to write on my own blog to help people to get the right solution in any difficult situation. My site is here.

    ReplyDelete
  7. There are many types welding process, mig welding one of them. Sometimes MIG welder collapse. You should know how to fix them. Check out this site for 120v mig welder.

    ReplyDelete
  8. I got too much interesting stuff on your blog. I guess I am not the only one having all the enjoyment here! Keep up the good work. best 110v mig welder

    ReplyDelete
  9. Fixing the work place and making it conducive to the usage of a MIG welding machine greatly lowers the chance of experiencing accidents in the area. MIG welder guides

    ReplyDelete
  10. Care about your workplace, it shouldn't be conductive. Amazing content to read and gonna find some fruitful information every time.

    myweldingyard

    ReplyDelete